SINGLE PHASE SERVO CONTROLLED VOLTAGE STABILIZER

Faith Products are recommended by leading Consultants and Contractors

• Servo Controlled Voltage Stabilizer meant to give constant output voltage irrespective of input voltage fluctuation.
• Servo Controlled Voltage Stabilizer is recommended for sophisticated equipments for good performance and long life.
• Stabilizer consists of microprocessor based printed circuit board (PCB) with operation amplifier.
• In Unbalanced model 3Phase Stabilizers voltage correction will be individual Phases .so we will get constant voltage output ±1%.
• Servo Controlled Voltage Stabilizer having auto transformer (variac, buck booster transformer, input MCB / MCCB, Contactor, Manual By Pass Switch).
• There are some model of stabilizers Air Cooled, Forced Air Cooled, Oil cooled and indoor model, outdoor model are also available.
• We are manufacturing 1KVA TO 100KVA in single phase 3KVA to 2000KVA In three phases.
• Having different range of input 360V- 460V, 340V- 480V, 295V- 465V, 240V-460V and 200V-460V.
• Stabilizer Controlled Voltage Stabilizer will give you ± 1% output and having protection of under voltage, over load voltage, short circuit trip, phase sequence trip, single phase prevention.
• Our Servo Controlled Voltage Stabilizer suitable for Automobile industries, CNC Machine, Printing industries, packing industries, medical industries, CT scan, MRI Scan, Air Condition, lift, commercial building, Residential building and so on.

SCVS is suitable for CNC Machines, CMM, Textile & Spinning mills, Cold Storage units, Food processing equipment, CT Scan, MRI machines, Retail outlets, Restaurants and Office applications.

• No potentiometer adjustments
• All parameters can be modified using the keypad in the front panel
• Set input voltage band
• Set output voltage
• Set output voltage sensitivity
• Output over / under voltage cut-off
• Input over voltage / under voltage cut-off
• Over load cut-off
• Trip time delay adjustments with variable setting
• AC stepper motor driven control
• Manual and auto start facility
• Common control card - any capacity
• Output start and stop facility
• Fully micro control function
• Generator compatibility
• Both outdoor and indoor models
• True RMS sensing without control transformer for output and input

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage.

Protections

• Electronic Over Load, Under Voltage, Over Voltage, Short Circuit, Over Load, Single Phasing, Phase Reversal and neutral to earth Voltage Protection
• Input Short Circuit and Over Load Protection with MCB up to 40KVA
• Input Short Circuit and Over Load Protection with MCCB more than 40KVA
• Output Low Voltage Protection
• Output High Voltage Protection
• Audio Alarm for Protections

Indications

• Input Mains on Indications,
• 3ph output on indication
• Phase Reversal indication
• over Load indication

Indications in LCD Display

• Input High and Input low
• Output on indication
• Output high Cut-off and Output Low Cut-off

Programmable Parameters

• Output voltage set ( 210-245V)
• Output Low Voltage Cut-off
• Output High Voltage Cut-off
• Output High Voltage Cut-off
• Input Low on LCD Display
• Input High on LCD Display
• Sensitivity / Regulation
• Over Load Cut-off
• CT full scale

Programmable Control Timings

• Over load Cut-off Time
• Auto Restart Time
• On & Off Delay Time

Programmable Controls

• Display Scrolling - Auto / Manual
• Start / Stop Buttons
• Menu / Start / Stop / Reset / Log Button
• Data Log: Last fault events log.